Pipe Grid Extras
-
Mega-Gridlock
#MGB
- 1-1/4″ pipe to 2″ truss tube
- DL 1250 lbs
- Joins 2 overlapping pipes in a 90° or parallel
-
Mega-Batten Clamp
#MBATB
- Uses the same hardware and wrench as the rest of the grid system
- 1/2″ hole in top for shackles
- DL 1250 lbs
-
Mega-Folding Batten Clamp
#MFBATM
- One piece, hinged batten hanger is the fastest way to hang 1-1/2″ pipe
- Only one fastener locks the hanger to the pipe
- DL 1675 lbs
-
Threaded Rod Hanger for Mega-Batten Clamp
#MBAT-TRH.375
- Connects to the Mega-Batten Clamp to hang from threaded rod, .375 and .500
- DL 1250
-
Pipe Wall Mount
#WM1.5PM
- Pipe wall mount has 5″ of overlap on grid pipe and is locked to pipe with 1/2″ set screw
- 4 holes to bolt to wall
-
Aluminum Pipe
#6061-P1-1.5-S40-240 Silver/40
- Black anodized or silver finish
- Schedule 40 or schedule 80
- 1O’ or 20′ lengths
-
Curved Pipe
#6061-P1-1.5-S40-240 Silver/40
- 1.5 pipe (1.9 OD) rolling dies can make pipe rolled to your specified radius
-
Mega-Quick Pipe Splice
#MQSM
- Joins 1-1/2″ pipes end to end without drilling
- Available for schedule 40 and schedule 80, also for 1-1/4″ pipe
- DL 600 lbs horizontal
-
Mega-Drop Down
#MDDB6 6″
- Easily lower a light fixture
- Wrench flats provide for easy adjustments
- 6″, 12″, 18″, 24″, 36″ lengths
- DL 600 lbs
-
Atlas Mic Stand Adapter
#MICAM.5-13x.75 male, #MICAF.5-13x.75 female
- Will hold a microphone mount and thread into most clamps
-
Metric to Inch MAC Adapter
#MAC ADAPTOR DSP
-
Bar Joist Washer
#BJWM
- Will not slip off the vertical legs of a bar joist when hanging threaded rod
-
Mega-Cable Carrier
#MCCM
- Provides a channel to drop cables into above the batten or grid
- DL 100 lbs
-
Purlin Clamp
#PCM1/2, #PCM3/8
- Installs to purlins, I-beams and bar joists up to 1″ thick
- Available with 1/2″ and 3/8″ hardware
- DL 500 lbs, 300 lbs
-
1/2-13 Eye Nut
#NE.5-13X-ABZ
- Available in various sizes
-
1/2-13 x 1 Eye Bolt
#EB.5-13×1.00-AZB
- Available in various sizes
-
5/8 Shackle
#Shackle 5/8
- Available in various sizes
-
Micro-Mic
#MKB.65
- Holds 5/8″ Atlas mic stand tubes
- Will clamp from 1/2″ to 2″
-
Mega-Handle
#MQM
- Handle permanently stays with the fixture
- Bolt nests into the cloverleaf socket
-
Mega-Combo Wrench
#MCM-Black, -Orange, -Blue, -Pink, -Green, -Purple, -Gold, -Red
- Adjusts 1/2″ and 5/16″ hex head and square bolts
- Fits on a keychain
- Can be personalized with your logo
-
Mongo Wrench
#MLT
- Fastens 1/2″ and 5/16″ hex head and square head bolts, plus coupler wing nuts
-
Uni-Bolt for Strut Channel
#UB2B
- DL 250 lbs
- For Unistrut and Kindorf style 1-5/8″ square channel
- Allows easy movement of fixtures
-
Mega-Folding Floor Stand
#MFFSB Black, #MFFSM Silver
- A compact folding stand for placing light fixtures on the stage floor
- Folds out into a stable 15″ light base
- Folds up into a 6″ square
- Fits into corners, tight spaces, and against walls
- Has replaceable rubber feet that will not mar floors
-
Slim Floor Stand
#SMFSM Silver, #SMFSB Black
- 1/2″ x 6″ x 6″ floor stand
- 4 rubber feet
- 3/8″ hex hardware
-
Safety Cable
#SCB Black, #SCW White, #SC Silver
-
Genie Fork Adapter
#GFA
- DL 1000 lbs
- Supplied with a 1/2″ x 1″
- Grade 5 bolt and Belleville spring washer to fasten the load to the adapter
- An additional 1/2″ bolt locks the adapter to the Genie fork
- Also fits Sumner Forks
-
Centre-Point Genie Fork Adapter
#GFA-CP-18-1
- Support speakers from a Genie Super Tower
-
Mega-Quick Disconnect
#FQRA
- Allows the fixture to be released quickly from the pipe or truss, and then replaced in the same location