200 Series Track System
The 200 series is an aluminum box-shaped curtain track especially designed to meet architectural specifications for straight traverses up to 20 feet in length. Classrooms, residences, board rooms, multi-purpose rooms, cafeterias, churches, hotels and banks are all ideal applications for the 200 series track. The tracks can be either recessed, surface mounted, or suspended from the ceiling. Uses 2 carriers per foot.
201 Specifine® Track Channel
Related products
233 End Stop
End Stops prevent carriers from moving beyond selected position in track.
Available in black and aluminum.
Related products
204 Removable End Stop
Removable End Stops prevent carriers from exiting track channel at ends of run. Permits easy replacement of carriers. Bolt prevents carriers from slipping out of track end. Hook included for curtain tieoff. Extends track by approx. 3/4 in. Weight: 0.3 oz.
Available in black and aluminum.
Related products
228 Splice Clamp
Anodized sleeve for joining track sections assuring proper alignment of track channels. Splice Clamps are approximately: 8″ long x 1-3/8″ wide x 1″ high.
Available in black and aluminum.
Related products
205 Single Carrier
Carrier spacing: 6″. Block provides “bumper-to-bumper” action, supported from 2 polyethylene wheels. Plated swivel for free, effortless and quiet curtain movement. Carrier width: Approximately 1-3/16″. Weight: 0.5 oz.
Available in black and aluminum.
Related products
206 Ball Bearing Single Carrier
Carrier spacing: 6″. Block, provides “bumper-to-bumper” action, supported from 2 nylon-tired ball-bearing wheels. Carrier width: Approximately 1-3/16″. Weight: 0.5 oz.
Available in black and aluminum.
Related products
209 Master Carrier
Composed of a plated steel body with 4 solid polyethylene wheels. Removable extension arm provides 8″ maximum overlap (4″ in front of 4″). Carrier length: Approximately 7-1/2″. Weight: 2.25 oz.
Available in black and aluminum.
Related products
211 Ball Bearing Master Carrier
Composed plated steel body with 4 nylon-tired ball-bearing wheels. Adjustable extension arm provides 8 inches maximum overlap (4 inches in front of 4 inches). Carriers width: Approximately 7 ½ inches.
Available in black and aluminum.
Related products
212 Live End Pulley
Equipped with 2 nylon ball-bearing wheels. Inserted into track end and functions also as end stop. Pulleys bracket width: Approximately 1-1/4″. Extends 1-1/2″ beyond track end.
Available in black and aluminum.
Related products
207 Dead End Pulley
Plated steel construction, equipped with 1 nylon-tired ball-bearing wheel. Extends 1-1/2″ beyond track end. Pulley bracket width: Approximately 1-1/4″. Weight: 1.5 oz.
Available in black and aluminum.
Related products
255 Tension Floor Pulley
Equipped with 1 nylon ball-bearing wheel. Tension spring provides cord tautness. Tension Floor Pulleys are approximately: 1″ long x 3/4″ wide x 7″ high. Weight: 3 oz.
Available in aluminum
Related products
221 Hanging Clamp
Related products
208 AV Carrier
Used with 201 Track Channel to support light-weight projection screens, maps, charts, etc. Steel block with 4 nylon tired ball-bearing wheels, S-hook, and swivel snap. Carrier length: Approximately 1-3/4″. Weight: 3 oz.
Only available in aluminum.
Related products
213 Adjustable Dead End Pulley
Equipped with 1 nylon ball-bearing wheel. Adjustable to any position along track without drilling. Designed for one-way or bi-parting operation on multiple spans. Pulleys width: Approximately 31/32″.
Available in black and aluminum.
Related products
222 Ceiling Clamps
For fastening track channel to T-bar on acoustical tile ceiling. Recommended spacing: 2 ft. – 6 in. Off-white color. 7/8 in. long (closed) x 3/4 in. wide x 3/16 in. high. Weight: 0.3 oz.
Available in Aluminum
Related products
232 Universal Wall Bracket
This bracket allows you to wall mount the tracks, either in a bi-part or one-way draw configuration. The brackets are provided with slots along the bottom edge sized to allow various projections for the tracks from 4″ to 8″. You can also use our 122 ceiling brackets or the mounting clips from these devices with this bracket. The side of the bracket is provided with mounting slots as well as mounting holes, to help provide accurate placement and leveling of the tracks. These units are fabricated from 1/8″ steel and are provided with a black powder coated finish. Weight 2 lbs. 1 oz.
Related products
234 Projection Bracket
Plated steel construction. Projection Brackets are used for wall mounting model 220 track systems. Projects center of track 3-1/2″ from wall (NOTE: stacked fabric will rub against wall). Approximately: 3-5/16″ x 3-11/16″.
Available in black or aluminum.
