800 Series Medium-Duty Curved Track System
The 800 series carries the weight of heavy curtain installations. Go big with a smooth-running, long-lasting curtain track system that you can rely on.
Note: All parts are available in black.
-
801 Track
6063-T5 extruded aluminum mill finish 1″ wide x 3-3/8″ high, .187″ thick
-
805 Carrier
2 Derlin wheels riveted to formed steel body with swivel hook, Nylatron glide strips reduce friction and noise
-
806 Ball Bearing Carrier
2 nylon-tired shielded ball bearing wheels riveted to steel body with swivel hook, Nylatron glide strips reduce friction and noise
-
807 Single End Pulley
4″ diameter Nylatron GS sheave with shielded ball bearings, steel housing clamps to track with sealed precision ball bearings, steel housing clamps to track, 3/16″ groove for use with motorized tracks
-
807m Single End Pulley
-
807OW Single End Pulley
2-1/2″ diameter steel sheave with sealed precision ball bearings, steel housing clamps to track, for one-way draw operation
-
808 Overlap Clamp
Formed steel clamps to align track at overlap
-
809 Master Carrier
2 Derlin wheel assemblies with swivel hook pivot on formed steel body, supplied with 2 clamps for anchoring operating line or cable, 1 pair required for overlapping tracks
-
811 Ball Bearing Master
2 nylon-tired shielded ball bearing wheel assemblies with swivel hooks pivot on formed steel body, supplied with 2 clamps for anchoring operating line or cable, 1 pair required for overlapping tracks
-
812 Double End Pulley
4″ diameter Nylatron GS sheave with shielded ball bearing, steel housing clamps to track
-
812M Single End Pulley
Heavy-duty 4″ diameter Nylatron GSM sheaves with sealed precision ball bearings, steel housing clamps to track, 3/16″ groove for use with motorized tracks
-
821 Hanging Clamp
Formed steel brackets clamp to track, adjusts to any position, 1 pair pictured
-
822 Ceiling Clamp
Steel plate mounts flush to ceiling, track clamps to bracket with offset clips
-
823 ‘S’ Hook
1-1/2″ steel hook for curtain attachment to carrier
-
824 Trim Chain
Chain added to carriers to provide 6″ of curtain height adjustment
-
827 ‘L’ Bracket
6″x6″ zinc plated bracket for track wall mount applications
-
828 Splice
Steel plates align and lock track sections together, track must be straight at joint, 1 pair pictured
-
829 Splice Drill
Fixture Hardened tool steel drill fixture for field drilling track for 828 splice
-
833 End Stop and Cord Support
Formed steel bracket bolts to track to support operating line and prevent carriers from traveling beyond desired location, 1 pair required for overlapping tracks
-
839 Pivot Device
Heavy steel construction with nylon-tired shielded ball bearing wheels, supplied with brackets for 1-3/8″ OD pipe of tubing (6′ max recommended length), allows masking draperies to be rotated to any angle, working load limit: 75 lbs
-
841 Indexing Pivot Device
Pivot device with special plate to index rotation at 22.5° increments. Supplied with brackets for 1-3/8″ OD pipe of tubing (6′ max recommended length), working load limit: 75 lbs
-
842 Brake Kit
Spring equipped arm with neoprene pad, add to pivot device to prevent undesired movement along track
-
845 Operating Line
1/4″ diameter black polyester braided over solid aramid core for manual operation
-
847 Operating Cable
Black polyester jacket braided over 3/32″ galvanized aircraft cable, for use with motorized tracks
-
855 Floor Block
4″ diameter Nylatron GS sheave with shielded ball bearing in steel housing, 9″ vertical adjustment
-
861 Double Spindle
Formed steel housing contains two ball bearing guides for operating line to follow curve, mount inside of curve on double end pulley section of track
-
863 Single Spindle
Formed steel housing contains one ball bearing guide for operating line to follow track curve, mount on inside of curve on single end pulley section of track
-
865 Outside Idler
Formed steel housing contains one ball bearing guide for operating line to follow track curve, mount to outside of curve on single end pulley section of track