500 Series Heavy-Duty Straight Track System
The 500 series a workhorse, moving large drapes smoothly, quickly and quietly. Perfect for community and civic theatres and houses of worship.
Note: All parts are available in black.
-
501 Track
14 gauge galvanized steel, roll-formed to 2-5/8″ wide x 2-3/4″ high
-
505 Carrier
2 polyethylene wheels riveted to black super tough nylon body with shielded ball bearing, heavy-duty hook, swivel, and trim chain for curtain attachment
-
506 Ball Bearing Carrier
2 nylon-tired sealed ball bearing wheels riveted to black super tough nylon body with heavy duty hook, swivel and 6″ trim chain for curtain attachment
-
507 Single End Pulley
4″ diameter Nylatron GS sheave with shielded ball bearing. Steel housing clamps to underside of track. Chain bracket for securing offstage curtain edge. 3/8″ groove
-
507M Single End Pulley
Heavy duty 4″ diameter Nylatron sheave with sealed precision ball bearings, steel housing clamps to underside of track, chain bracket for securing offstage curtain edge, 3/16″ groove for use with motorized tracks
-
508 Overlap Clamp
Formed steel clamps to align track at overlap
-
509 Master Carrier
4 polyethylene wheels riveted to steel body with 2 shielded ball bearings, supplied with 2 clamps for anchoring operating line or cable, 1 pair required for overlapping tracks
-
511 Ball Bearing Master Carrier
4 nylon-tired shielded ball bearing wheels riveted to steel body with 2 swivel hooks, supplied with 2 clamps for anchoring operating line or cable. 1 pair required for overlapping tracks
-
512 Double End Pulley
4″ diameter Nylatron GS sheave with shielded ball bearing, steel housing clamps to underside of track, chain bracket for securing of stage curtain edge, 3/8″ groove
-
512M Double End Pulley
Heavy-duty 4″ diameter Nylatron GSM sheaves with sealed precision ball bearings, steel housing clamps to underside of track, chain bracket for securing offstage curtain edge, 3/16″ groove for use with motorized tracks
-
513 Rear Fold Guide
Allows curtains to fold at offstage edges
-
521 Hanging Clamp
Formed steel brackets clamp to track, adjusts to any position, 1 pair pictured
-
522 Hanging Clamp With Idler
No. 521 hanging clamp with nylatron GS ball bearing roller for supporting operating line or cable
-
523 ‘S’ Hook
1-1/2″ steel hook for curtain attachment to carrier
-
524 Trim Chain
Chain added to carriers to provide 6″ of curtain height adjustment
-
527 ‘L’ Bracket
6″x6″ zinc plated bracket for track wall mount applications
-
528 Splice
Formed steel brackets align and lock track sections together, 1 pair pictured
-
529 Ceiling Splice
Formed steel brackets to align and lock track sections together on ceiling mounted tracks, 1 pair pictured
-
533 End Stop and Cord Support
Steel clamp with eye to support operating line and prevent carriers from travelling beyond desired location, 1 pair required for overlapping tracks
-
534 End Stop
Bolt with horizontal pipe spacer to prevent carriers from travelling beyond track desired location, for use with walk along tracks
-
539 Pivot Device
Heavy steel construction with nylon wheels, supplied with brackets for 1-3/8″ OD pipe of tubing (6′ max recommended length), allows masking draperies to be rotated to any angle, working load limit: 75 lbs
-
541 Indexing Pivot Device
Pivot device with special plate to index rotation at 22.5° increments, supplied with brackets for 1-3/8″ OD pipe of tubing (6′ max recommended length), working load limit: 75 lbs
-
542 Brake Kit
Spring equipped arm with neoprene pad, add to pivot device to prevent undesired movement along track
-
545 Operating Line
1/4″ diameter black polyester braided over solid aramid core for manual operation
-
547 Operating Cable
Black polyester jacket braided over 3/32″ galvanized aircraft cable, for use with motorized tracks
-
555 Floor Block
4″ diameter Nylatron GS sheave with shielded ball bearing in steel housing, 9″ vertical adjustment
-
558 Centre Pipe Support
Formed steel bracket used to support tracks at overlap