2 neoprene-tired ball bearing wheels riveted to plated steel body with heavy duty hook, swivel and trim chain. Nylatron glide strips and rubber bumper reduce friction and noise.

For 3/8″ operating line. 2 No. 601 carriers swivel on formed steel body with 2 clamps for anchoring line or cable. 1 pair required for overlapping tracks.

For 3/16″ operating cable. 2 No. 601 carriers swivel on formed steel body with 2 clamps for anchoring line or cable. 1 pair required for overlapping tracks.

Nylon-tired wheels. 2 single carriers swivel on steel connecting plate with heavy duty hook, swivel and trim chain.

Grooved for 3/8″ operating line. 6″ diameter Nylatron GS sheaves with sealed precision ball bearings. Heavy duty steel housing clamps to top flange of track.

Grooved for 3/16″ operating cable. 6″ diameter Nylatron GS sheaves with sealed precision ball bearings. Heavy duty steel housing clamps to top flange of track.

Grooved for 3/8″ operating line. 6″ diameter Nylatron GS sheave with sealed precision ball bearings. Heavy duty steel housing clamps to top flange of track.

Grooved for 3/16″ operating cable. 6″ diameter Nylatron GS sheave with sealed precision ball bearings. Heavy duty steel housing clamps to top flange of track.

4″ diameter steel sheave with sealed precision ball bearings. Heavy duty steel housing clamps to top flange of track and provides constant cable tension on large motorized tracks.

Formed steel clamps align tracks at overlap.

Formed steel bracket for suspending track. Track clamps to bracket with offset clips.

Steel brackets align and lock track sections together. 1 pair pictured.

6″ diameter Nylatron GS sheave with sealed precision ball bearings in heavy duty steel housing with 9″ vertical adjustment. Grooved to accept 3/8″ operating line.

Bolt with steel spacers to prevent carriers from travelling beyond desired location. 2 pair required for overlapping tracks.

6063-T5 extruded aluminum .187″ thick. 20′ and 24′ stock lengths.

Formed steel bracket mounts to ceiling. Track clamps to bracket with offset clips.

3/8″ diameter black polyester double braided over solid polyester core for manual operation.

3/16″ diameter black polyester jacket braided over 3/32″ galvanized aircraft cable.

2 nylon-tired ball bearing wheels riveted to plated steel body with heavy duty hook, swivel and trim chain. Nylatron glide strips and rubber bumper reduce friction and noise.

For 3/8″ operating line. 2 No. 616 carriers swivel on formed steel body with 2 clamps for anchoring line or cable. 1 pair required for overlapping tracks.

For 3/16″ operating cable. 2 No. 616 carriers swivel on formed steel body with 2 clamps for anchoring line or cable. 1 pair required for overlapping tracks.

Nylon-tired wheels. 2 single carriers swivel on steel connecting plate with heavy duty hook, swivel and trim chain.

5/16″ shielded ball bearings. 3 Nylatron GS rollers mounted to tapped steel bracket. Bracket mounts to track with offset clips. Suggested spacing: 5′. Additional guides required at each curve.

3/8″ sealed precision ball bearings. 3 Nylatron GS rollers mounted to tapped steel bracket. Bracket mounts to track with offset clips. Suggested spacing: 5′. Additional guides required at each curve.

Steel housing contains 6″ diameter Nylatron GS sheaves with sealed precision ball bearings. Used when operating lines must be turned horizontally toward curtain machine or mule block.

1-1/2″ steel hook for curtain attachment to carrier.

Tapped steel plate mounts flush to ceiling. Track clamps to bracket with offset clips. For use on walk-along tracks only.

Heavy steel construction with nylon-tired ball bearing wheels. Supplied with brackets for 1-3/8″ OD pipe or tubing (recommended 6 foot maximum length). Allows masking draperies to be rotated to any angle. Working load limit: 75 pounds.

Spring loaded arm with neoprene pad. Add to pivot device to prevent movement along track.